Prepared for the toughest cleaning jobs.
Specifically prepared for used engine component cleaning because of the harsh environment and conditions and difficult cleaning demands.Arguably the most demanding blast cleaning requirement. Rusty Cylinder Heads , Engine Blocks, Crankshafts, Rods, Rust parts are an easy cleaning task for these powerful blasters.The Industrial Series is an outstanding Value in blasting Cabinets and can be supplied as Suction or Pressure configurations.
Industrial Series will handle the tough jobs in a very time efficient working cycle. Available in a 36x 36,44x26, 48x36, 60x48 and 60x60 Cabinet sizes. Reclaimers are available from 400 CFM - 900 CFM Reclaimer Separator will keep the cabinet visually clear while separating and managing the reusable media. Filter cabinets are available with filter bags or reverse pulse air cartridge systems. Time is money the Industrial series will get the job done fast while removing baked in carbon deposits, rust,scale and paint extremely fast. These machines are popular in Industrial cleaning applications as well, an easy task for machines prepared for used engine components that deal with rust, carbon and paint.
PRESSURE BLASTING CABINET, 36" WIDE x 36" DEEP x 36" HIGH, 1/4" BORE TUNGSTEN CARBIDE NOZZLE STANDARD
MODELS (SINGLE PHASE 115/1/60)
700 CFM RECLAIM WITH DUST BAG - 3636-7P (1 DB)
700 CFM RECLAIM WITH D-10 DUST COLLECTOR - 3636-7PDC
700 CFM RECLAIM WITH M2 DUST COLLECTOR - 3636-7PM2DC
MODELS (THREE (3) PHASE - SPECIFY VOLTAGE)
700 CFM RECLAIM WITH DUST BAG - 3636-7P-3 (1 DB)
700 CFM RECLAIM WITH D-10 DUST COLLECTOR - 3636-7PDC-3
700 CFM RECLAIM WITH M2 DUST COLLECTOR - 3636-7PM2DC-3
900 CFM RECLAIM WITH D-20 DUST COLLECTOR - 3636-9PDC-3
900 CFM RECLAIM WITH M4 DUST COLLECTOR - 3636-9PM4DC-3
900 CFM RECLAIM WITH RPJ2 DUST COLLECTOR - 3636-9PRPJ2-3
900 CFM RECLAIM WITH RPJH2 DUST COLLECTOR - 3636-9PRPJH2-3
FEATURES
1.Cabinet Construction:14 Gauge Reinforced Continuously Welded
2.High Angle Sump
3.Finish:Durable EnamelPrimed and Painted. Corrosion Resistant
4.Working Chamber:Dimensions: 36"W x 36"D x 36"H
5.Double Walled Doors
6.Safety Door Interlocks
7.Self Adjusting Door Latches
8.Knife Edge, Self Sealing, Full Gaskets
9.Full Length Hinges
11.Viewing Window:12.5"H x 21"W
12.Quick Change, Square Cornered,Tempered Glass
13.Mylar Protector With Included Dispenser
14.Lighting: Two-Tube, 24" Fluorescent Fixture LowTemperature, Shielded, Externally Located 120 V 60 Hz
15.Foot Valve: For instant Changing From Right to Left Foot
16On/Off Air Logic Controls
17.Gloves:Abrasive Resistant, Cloth Lined, Full Length Snap-In, Static Resistant Gauntlet
18.Hoses: 1/2" ID. Lightweight, Flexible, Abrasive Resistant
19.Blow-Off Gun:Fingertip Control Blow Off Nozzle
20.Blasting Nozzle:Tungsten Carbide, 1/4" Standard
21.ressure Pot:Tungsten ASME Coded, one (1) cu. ft. capacity air pressure, remote controlled Automatic Refilling Heavy Screen Drawer
Air (approximate) Requirements
...........................40 PSI .......60 PSI ........80 PSI
3/16" nozzle .......21 CFM... 32 CFM...... 41 CFM
1/4" nozzle......... 41 CFM... 56 CFM...... 72 CFM
5/16" nozzle .......64 CFM... 88 CFM ......113 CFM
AVAILABLE ACCESSORIES
Pressure Pot Upgrade to 3.0 cu. ft. Standard Cone
Pressure Pot Upgrade to 6.0 cu. ft. Standard Cone
Pressure Pot Upgrade to 3.9 cu. ft. 60° 2 Outlet Cone w/ Two (2) Automatic Plunger Valves
PMB Upgrades (Plastic Media)
High Static (Heavy Media) Upgrade
Set-In Turntable (500 LB Capacity)
Track Assembly (500 LB Capacity)
Turntable & Track Assemblies (500 LB Capacity)
Heavy Duty Turntable & Track Assemblies (1000 LB Capacity)
Two (2) Gallon Tumble Basket, Adjustable Timer, 6 RPM Gear Motor, Gun Mount Rod & Bracket (25 LB Capacity)
Vertical Doors
Wear Kit - Reclaim Wear Plate, Tungsten Carbide Nozzle, Rubber Curtains (Sides & Back)