Abrasive Media Blasting Equipment
All Cabinets are Available in Pressure or Suction
Reclaimer: High performance 400 or 600 CFM cyclone type reclaimer separates good media from dust and by products.
Light Box: Two (2) tube 24: fluorescent light, for best possible lighting in blast chamber, On-Off control switch for light and reclaim.
Viewing Window: Large 12″X20″ tempered glass provides long life and minimizes static build up of dust.
Door Latch: Heavy-duty cam type, adjustable for positive door seal.
Glove Arm Hole: Heavy-duty cloth lined vinyl gloves are snap-in and quick changing, allowing easy access of handling parts in blast chamber.
Air Flow Regulator and Gauge: Allows adjustable air pressure to gun for proper media flow to provide finish desired.
Clean out door: Allows recovery of small parts that may fall from blast chamber.
Safety Foot Control: Floating foot control.
Doors: Large double walled doors (both sides) for opening size see figure “C”. Knife sealing edge assures positive seal in blast chamber.
Motor: 400 CFM, 1/2 HP, 120 VOLTS, 11 AMP, 3450 RPM or 600 CFM, 1 HP, 120 VOLTS, 16 AMP, 3450 RPM.
Dust Collector: Cotton sateen dust bag collects dust from reclaimer. Zipper in bottom for emptying dust and debris. Optional dust collector available.
Fill Door: to add media to machine and remove debris from debris screen basket inside reclaimer.
Sump Hose: 4″ flexible duct hose, from machine sump outlet to reclaimer inlet.
Media Valve: Universal feed allowing all types of abrasives to be used. 2″ plug outlet for easy clean out.
Media Hose: 1/2″ media hose, from media valve to bottom fitting on blast gun.
Compressed Air Inlet: 1/2″ coupler for easy installation of optional moisture trap.
Mylar Dispenser: Holds roll of mylar to protect viewing window. (not shown).
M44-4DC – 4436 WITH 400 RECLAIMER & D10 DUST COLLECTOR
M44-4M2DC – 4436 WITH 400 RECLAIMER & M2 DUST COLLECTOR
M44-6 – 4436 WITH 600 RECLAIMER & DUST BAG
M44-6DC – 4436 WITH 600 RECLAIMER & D10 DUST COLLECTOR
M44-6M2DC – 4436 WITH 600 RECLAIMER & M2 DUST COLLECTOR
M44-6PD10 – 4436 WITH 600 RECLAIMER, PRESSURE POT & D10 DUST COLLECTOR
M44-6PM2DC – 4436 WITH 600 RECLAIMER, PRESSURE POT & M2 DUST COLLECTOR
Blast-It- All Blast Cabinets