The PB " POWER BLAST " Series are full featured high quality blasting cabinet with excellent bead delivery ,excellent cabinet visibility and reclaimer separator media management. Don't be fooled by the economical pricing. The  Power Blasters are constructed from heavy gauge metal, which is continuously welded. They utilizes the reliable blast and peen blast gun for consistent blasting. The Blaster can be ordered with the 100 CFM Cartridge filter system or a 300 CFM reclamation system. The DC10 filter Cabinet can be added for those that blast in dust sensitive work areas.  The advantage of the reclamation system is the ability to pull the dust from the abrasive as well as in keeping the cabinet clear while blasting.  Our Engine Rebuilder customers utilize the  Power Blaster for removal of rust , carbon, paint and scale on cylinder heads , valves , flywheels and engine component blasting

Bench Top Glass Bead Cabinet 28x24
Dust Collector: 100 CFM cartridge type collector for better dust control providing cleaner working chamber.

Light Box: Two (2) tube 24: fluorescent light, for best possible lighting in blast chamber, On-Off control switch for light and cartridge dust collector.

Viewing Window: Large 12"X20" tempered glass provides long life and minimizes static build up of dust.

Door Latch: Heavy-duty cam type, adjustable for positive door seal.

Glove Arm Hole: Heavy duty cloth lined vinyl snap-in gloves are quick changing.

Air Flow Regulator and Gauge: Allows adjustable air pressure to gun for proper media flow to provide finish desired.

Clean out door: Easy access to filter screen, trapping heavy particles form abrasives. Allows recovery of small parts that may fall from blast chamber.

Safety Foot Control: Prevents accidental blast operation.

Doors: Large double walled doors (both sides). Knife sealing edge assures positive seal in blast chamber.

Shaker Handle: Handle for shaking dust from cartridge.

Cartridge: 8 1/2" x 9 1/2" cartridge with 175 2" pleats.

Dust Sump: Allows dust to flow directly into waste container.

Media Hose: 1/2" media hose, from media valve to bottom fitting on blast gun.

Media Valve: Universal Feed allowing all types of abrasives to be used. 2" plug outlet for easy clean-out.

Motor: 120 volt, 15 amp switch control.

Compressed Air Inlet: 1/2" coupler for easy installation of optional moisture trap.

Media Blast Gun:

Lightweight aluminum pistol grip for long life. Interchangeable air jets and nozzles for various air supplies and media flow.

1/8" air jet supplied as standard. 5/32" - 3/16" air jets with sized nozzles supplied upon request.

Suction Gun Air Requirements Gun#40 PSI60 PSI80 PSI

1/4" Nozzle - 1/8" Air Jet #4            12 CFM17 CFM21 CFM

5/16" Nozzle - 5/32" Air Jet #5        19 CFM27 CFM34 CFM

3/8" Nozzle - 3/16" Air Jet  #6         27 CFM37 CFM47 CFM
Order Desk: 1-413-566-0037

  Glass Bead Cabinets Blast Cabinets
               Blasting Cabinets
Blast Cabinet 2842 Floor Space