(413) 566-1255
413-566-1255
sales@glassbeadcabinets.com
ABC 3636P
ABC 4836P
ABC 6036P
ABC Shot Peeners
Shot peening is a controlled process used to increase the fatigue life of components and fabrications. The process of shot peening creates a compressive surface layer that extends into the material and has the effect of reducing any subsequent tensile fatigue loads. It is used as a final process post heat treatment and post final machining except in special cases.

ABC 3636P Peener consists of cabinet with pressure vessel mounted underneath the cabinet with trash drawer. 1 cu. ft. pressure pot, 1/2" id blast hose, 1/4" tungsten carbide nozzle, regulator, moisture separator, adjustable media valve, automatic blow down.The Blast cabinets, 36" wide x 36" deep x 30" high, 1/4" bore tungsten carbide nozzle standard
ABC 4836P Peener consists of cabinet with pressure vessel mounted underneath the cabinet with trash drawer. 1 cu. ft. pressure pot, 1/2" id blast hose, 1/4" tungsten carbide nozzle, regulator, moisture separator, adjustable media valve, automatic blow down. The blast cabinet, 48" wide x 36" deep x 30" high, 1/4" bore tungsten carbide nozzle standard
ABC 6036P consists of cabinet with pressure vessel mounted underneath the cabinet with trash drawer. 1 cu. ft. pressure pot, 1/2" id blast hose, 1/4" tungsten carbide nozzle, regulator, moisture separator, adjustable media valve, automatic blow down.The blast cabinet, 60" wide x 36" deep x 30" high, 1/4" bore tungsten carbide nozzle standard
BLAST-IT-ALL
Dual Blast Cabinets
Blast-It- All Blast Cabinets